FT DELTAFLYER

by jerimiah85 | June 4, 2013 | (6) Posted in Just Fun

Meet My thingamajigg :) i was going to throw both planes out but i wanted to try this and see how it would fly.. It is Great in the air... the tail section from the ft flyer and ProjectFlightDesign's Delta. i love the wing but want to make it from fanfold ( dt foam only last so long ) so here is the outcome. its not the best looking thing but it flyes like its on rails. i will also be making a v2 of this from fanfold and make it a mid wing pusher so i can put my fpv gear up top.. please feel free to let me know what ya think and if you have dont this.. if not Give it a try. thanks for looking.

 

bbq push rods flitetest horns 3 9g servos, 1200kv turnigy Aerodrive Brushless, 1000ma 2cell , 9043 sf prop. some ducktape and hotglue..

 

Bottom view just some black tape

COMMENTS

NoUsername on June 13, 2013
The design is just outstanding, like it very much.
Log In to reply
jerimiah85 on June 13, 2013
Thank you baronbernie
Log In to reply
RoyBro on June 12, 2013
How are your control surfaces set up. Are the ailerons set up as ailerons or elevons (since the FT Flyer tail adds an elevator)?
Log In to reply
jerimiah85 on June 12, 2013
It's set up with ailerons and an elevator I didn't expect it to fly at all this was the first flight and I'm not good with bank and yank as you can see. Thanks for the comment.

-jerimiah85
Log In to reply

You need to log-in to comment on articles.


FT DELTAFLYER