Hi FT community!
If you don’t know what to do with your old inductrix and tinywhoop micro Quads here is a cool idea :
This is the plan to build my Tiny Whoov.
The Tiny Whoov is a nano remote controled hoovercraft which uses the power and control system of a tiny whoop or blade inductrix like nano quads (fpv or not).
It's a very simple 1 hour build ! Just cut the different parts out of a 5 or 6mm foam sheet (depron or paperfoam) and glue them together with hot glue gun (following the letters and for positioning). Paint it and add the electronics with the glue gun as well. Please have a close look at the pictures to understand what motor goes where (it took me some time and tests to figure this out ;) basicall front motors = hover, back motors = thrust and direction.
You can add a "skirt" made of a plastic bag to make it even better, but it works very well without it.
Please leave me a feedback or comments if you like it !
Can't wait to see what you guys will make with this...
Alex (@badassdrones sur instagram)