{"product_id":"radiomaster-rp1-v2-expresslrs-2-4ghz-nano-receiver","title":"RadioMaster RP1 V2 ExpressLRS 2.4ghz Nano Receiver","description":"\u003cp\u003e\u003cspan style=\"font-size: small; font-family: verdana, geneva;\"\u003eThe RadioMaster RP series receivers are built-in a TCXO (temperature-compensated crystal oscillator) now, which ensures reliable, stable, and accurate signal reception, allowing for superior performance in demanding environments and enhancing the flight experience.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small; font-family: verdana, geneva;\"\u003eThe RP1 2.4GHz ELRS nano series receiver is an open-source receiver based on ExpressLRS. The Nano receiver, first developed by Jye Smith from the ExpressLRS development team, features ESP8285 MCU and SX1280 RF chip. The RP2 has a built-in ceramic antenna which is super light and small in size and ideal for racing.  The RP1 has a UFL antenna socket for full-range antenna use.  The RP1 features WIFI built in so you can upgrade firmware by WIFI and configure the Receiver via the built-in WebUI with your PC or mobile phone. Due to the low-latency and high-refresh-rate RF module, the RP2 is ideal for FPV races or Long Range.  Suitable for many models due to the ultra-light and Nano size, this receiver can fit just about anywhere!\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small; font-family: verdana, geneva;\"\u003eVisit \u003ca href=\"https:\/\/www.expresslrs.org\/\" target=\"_blank\"\u003ehttps:\/\/www.expresslrs.org\/\u003c\/a\u003e to learn more.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: small;\"\u003eFeatures\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: small;\"\u003eImproved PCB design is better for heat dissipation.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: small;\"\u003eUpgraded rigid antenna with greater durability and performance.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: small;\"\u003eLED on the top side of PCB.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: small;\"\u003eSolder pads are improved and easier to solder to.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: small;\"\u003eBuilt-in a TCXO (temperature compensated crystal oscillator)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: small;\"\u003eCompatible with all 2.4GHz ExpressLRS modules and transmitters with built in 2.4GHz ExpressLRS\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: small;\"\u003eSpecification\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: small;\"\u003eItem: RP1 Nano ExpressLRS 2.4ghz Receiver\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: small;\"\u003eType: ISM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: small;\"\u003eMCU: EPS8285\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: small;\"\u003eRF Chip: SEMTECH SX1281\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: small;\"\u003eTelemetry RF power: 10mW\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: small;\"\u003eAntenna: 65mm 2.4ghz T Antenna\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: small;\"\u003eFrequency Range: 2.404 - 2.479 Ghz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: small;\"\u003eMaximum receive refresh rate: 500Hz \/ F1000Hz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: small;\"\u003eMinimum receiver refresh rate: 25Hz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: small;\"\u003eWorking voltage: 5v\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: small;\"\u003eWeight: 2.2g (Including antenna)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: small;\"\u003eDimension: 13mm*11mm*3mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: small;\"\u003eFirmware Version: ExpressLRS v2.4 pre-installed\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: small;\"\u003eFW Target: RadioMaster RP1\/2 2400 RX\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: small;\"\u003eBus interface: CRSF \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: small;\"\u003eTCXO (temperature compensated crystal oscillator)\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003eThe TCXO ensures high stability and accuracy in frequency control, compensating for temperature variations. This results in consistent and reliable signal reception, even in extreme temperature conditions. It also reduces frequency drift over time, providing long-term frequency stability and preventing signal degradation.\u003c\/span\u003e\u003c\/p\u003e","brand":"Flite Test","offers":[{"title":"Default Title","offer_id":44587037229101,"sku":"5218100920","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/6871\/7869\/files\/RP1-V2-1_1800x1800__45742.1701894420.1280.1280.jpg?v=1770317615","url":"https:\/\/www.flitetest.com\/products\/radiomaster-rp1-v2-expresslrs-2-4ghz-nano-receiver","provider":"Flite Test","version":"1.0","type":"link"}