Mikey's FPV v3

by FliteTest | January 30, 2012 | (15) Posted in Reviews

In this episode of Flite Test, Josh and Josh talk about Mikey's FPV v3. This plane is an extremely well designed plane, it's a versatile FPV slow flying trainer. We want to thank Will for from Mikey's RC for being so friendly and helpful! Watch this video to see more. Get FREE plans here: http://mikeysrc.com/FPV_V3.html   Parts we used: TURNIGY Plush 25amp Speed Controller Turnigy Park450 Brushless Outrunner 1050kv LINKAGE stopper D2.1MM (10SETS) GWS EP Propeller (RD-1047 254x119mm) (6pcs/set) HXT900 9g / 1.6kg / .12sec Micro Servo Turnigy 2200mAh 3S 20C Lipo Pack PIN horns L22XW19XH.9 (10SETS)

COMMENTS

pyc789 on July 15, 2012
lol
Log In to reply
fishmanpuffer on February 16, 2015
first off that's not the same design as mike plane his has the motor mounted in front of the vert. stab so I was wondering if by you changing the CG does it fly the same as mikes plane.In your video I liked the way the plane flys maybe you can give us more details on your custom setup as to where you mounted the motor(in inches) and other change you made.
Log In to reply
mccoy on July 12, 2015
I build Mickeys plane like yours but when I try and fly it it noses down. When you hold the plane in your hands with the throttle up you can feel it pulling the nose down. I have changed the CG, nose weights etc... don't know why it won't pull up? can you give me some advice?
Log In to reply

You need to log-in to comment on articles.


Mikey's FPV v3