Scratch Built Flying Wing for Power Pod Series

by rayman2530 | June 25, 2013 | (0) Posted in Projects

I started on this new project after I built power pod designs off of Flite Test. After a while I started designing my own airframes and a flying wing came to mind. I know there is the delta power pod design but an official flying wing sounded cool.

Material: poster Foam ( some paper striped to help with weight)

Wingspan: 50 "

Length: 13"

Frame Weight: 11 5/8 oz.

Full: 1lb 6oz

This is the first model, hopefully i can start on more final designs after i find out the flight characteristics. 

- Find this article & others like it at www.FliteTest.com -

COMMENTS

ramkiran on July 11, 2013
Thats a Nice design, can u post Built plans or dimensions, I want to build one
Log In to reply
rayman2530 on July 18, 2013
Thank you. When I first flew the wing, it was the first flying wing that I have flown that wanted to fly slow. I put the less powerful powerpod on it and it flew okay.... It had a major problem with porpoising.
Since then I have made a small wing (36" with a 7x6 prop and it went about 40mph) and a huge wing( 62" setup with video.)
I can post anyone of the plans, just tell me which ones and I will be more than happy to.
Log In to reply
awesomestuntguy on July 23, 2013
Why not both?
Log In to reply
Michael9865 on January 25, 2014
It would be nice to see your plans for all 3 sizes actually. Thanks for sharing.
Log In to reply
Holski77 on January 28, 2014
Do you just land on the battery?

Log In to reply

You need to log-in to comment on articles.

rayman2530

(22)

Scratch Built Flying Wing for Power Pod Series