I Just finished my 3D ish Funflyer
It's In the same construction as the baby blender or the 3d from flite test
I took the PA Addiction as an example and started working from there.
The wing is a symetrical armin wing with a octangular fuse.
the dymensions are
WS: 1060 mm
L: 1000 mm
W: 1250 Gr ready to fly
Motor NTM 3548 1100 kv with or a 11 x 5.5 or a 12 x 6 APC E prop
Battery: 3S lipo 1600 mh 30-40 c
With It's 1250 gr flying weight I guess it's kinda too heavy for 3D flying
But I bet it'll be a great funflyer,, or at least I hope cause I haven't flown it yet
The motor has power enough, with the 12 x 6 it will have 1750 gr of thrust (calculated with Ecalc)
Let's see if it flies
I'll keep you informed
Sadly I don't have a lot of construction pictures
It took me a while because of the weather but finally she flew.
And she flies great stable but crisp enough power to hover and do all the tricks in the book.
Now I have to learn to do them :)
0 comments