5.8G FPV Setup Part 2 LC Filter & Regulatos

June 25, 2013|jamiedco

this is the video part of the series

now this is the circuit diagram

this is the strip board you will need to cut for a lc filter

this is the parts list

LC Filter Parts List
1 x ferrite ring (off esc)
1 x 470uf 25v electrostatic capacitor
1 x led (colour is ur choice)
1 x 470ohm or 1k resistor
also some wire to hook up the parts and wind the coil

LC Filter Regulator Parts List
1 x ferrite ring (off esc)
1 x lm7809 (or equivalent )
1 x 10uf capacitor (input side )
1 x 220uf capacitor (for output side )
1 x led (colour is ur choice)
1 x 470ohm or 1k resistor
also some wire to hook up the parts and wind the coil

here are my builds of the lc filter and the regulator