Add a Slide Pot to your 9XR

|rctestbench
Add a Slide Pot to your 9XR

 

I show how i added a slider potentiometer to the side of my turnigy 9XR. It is hard to use the rotating pots on the turnigy 9XR to control the tilt axis on a camera gimbal while flying fpv. By adding a slider potentiometer to the side of the radio, i can keep my hands in place to control my aircraft. Simple procedure exchanging a new slider 5K ohm pot for the original 5K ohm pot. With some minor alterations to the case of the radio, the new slider will help you keep control of your aircraft.

Link for the slider potentiometer on mouser.com

http://www.mouser.com/ProductDetail/Alpha-Taiwan/RA2045F-20A-15LC-B5K-C/?qs=%2fha2pyFadugyeaqSo53ldhBZJ7YfSnm5urI7Z5WVyMCeuFrR%252brW1uA%3d%3d

Mouser Part #: 312-2045F-A5K
Manufacturer Part #: RA2045F-20A-15LC-B5K-C
Manufacturer: Alpha (Taiwan)
Description: Slide Potentiometers 20mm TRVL LINEAR 5K AMBER LED PC MOUNT

0 comments

Leave a comment

Please note, comments need to be approved before they are published.

Have a story to share?

Share your builds, flying experiences and tips with the Flite Test community.

Write For Us →