FTScratchBuild-Advanced
The FT Baby Blender (Version 2) is an updated version of our original foam board scratch build! We took input from you (our viewers) and redesigned this scratch build/ speed build kit with added strength, better flight characteristics and a much easier build experience!
Baby Blender v2 Step-By-Step Build Instructions [HERE]
We've kept the dimensions the same, but we've improved the design and ease of build for the FT Baby Blender Swappable (version 2).
Among the improvements are elevator notches into the fuse to align both fuse and tail at one time.
The bottom of rudder is stronger and is secured by fuse sides.
The elevator incidence and thrust angle has been changed from the previous design, removing any pitch changes when the throttle is changed.
Higher lift airfoil and tabbed wing spars for easy build and improved flight characteristics.
Landing gear mount is stronger and easier to install.
We want to thank all of you who have built the Baby Blender and have given us feedback to help improve the scratch build design!
We've made this scratch build also available as a Speed Build Kit available in our web store!
Be sure to check out our Decal Kits as well! Thanks again for all the feedback and support!
Thanks again for all of the input on the previous Baby Blender scratch build! We'd love to see and hear your results with this new design. Be sure to submit your photos, videos and input on your builds!
MORE PHOTOS available! (CLICK HERE)
Join the discussion and submit your own builds in our Forum Post!
FREE Build Plans:
FT-BabyBlender-Swappable-v2-PLANS [FULL SIZE]
FT-BabyBlender-Swappable-v2-PLANS [TILED]
FT-BabyBlender-Swappable-v2-PLANS [ALL IN ONE]
Click HERE to see the POWER POD BUILD VIDEO
Equipment used in this build:
FT Control Horns
NTM Prop Drive Series 28-26A 1200kv / 250w
Hextronic 9 Gram Servo
TURNIGY Plush 25amp Speed Controller
Turnigy 1300mAh 3S 25C Lipo Pack
Linkage Stopper "Speed Clevis"
.81mm piano wire (push rods)
Futaba T8FG Super 14ch Transmitter w/R6208SB 2.4GHz Receiver
Futaba R6106HFC 2.4GHz FASST Mid Range 6Ch Rx
Additional/Alternate components:
Suppo 2208/14 1450kv Brushless Motor (Park 370 equiv.)
APC-style Electric Propeller - 8x4E
Suppo SP-90 9g Micro Servo
0 comments