Bixler 2 Prop Adaptor Problem - SOLVED FOR FREE

|Dave Vet
Bixler 2 Prop Adaptor Problem - SOLVED FOR FREE

If you cant fix something with cable ties, your just not using enough cable ties.

Today I recieved my Hobbyking order. Finally! I can get my bixler back up in the air after a mid-air collision with a combat wing (dont ask). I put on my new prop adaptor and prop and found, well what people say about those adaptors is true. My last prop adaptor was usable, this one, is unfortnately not. The amount of vibration produced by this out of whack piece of 'engineering' was pretty amazing. I sat the bixler in the corner in frustration.

An hour later this little idea sprung into my head, just like a bought one.. only better!!

Make sure you use good quality cable ties, if your Australian, SuperCheapAuto sell the best!! 

 

Happy Flying! :)

 

0 comments

Leave a comment

Please note, comments need to be approved before they are published.

Have a story to share?

Share your builds, flying experiences and tips with the Flite Test community.

Write For Us →