This is my 4th Copter. I always built simple frames. Everything made of wood, screws and zip ties. But my wife always…. was not very happy with the design :-)
This was the reason for this new frame. And really… no wires outside, everything fits perfect and the 2826 motors are perfect for this frame.
In the Video the Copter flights with a KK2.0. Some weeks later, I ordered a kk2.1 and it is significant better. It is more stable and the stabilization Mode works good.
TeileListe / Part List
- 1 Hobbyking KK2.0 Multi-rotor LCD Flight Control Board
- 3 NTM Prop Drive Series 28-26 1100kv / 300w (short shaft version)
- 3 NTM Prop Drive 28 Series Accessory Pack
- 1 Y-3 Fiberglass Tri-Copter Frame (KIT)
- 3 Turnigy Multistar 30 Amp Multi-rotor Brushless ESC 2-4S (OPTO)
- 1 Turnigy TGY-9018MG Metal Gear Servo 2.5kg/13g/0.10
- 1 Individual HXT 3.5mm connector for motor/ESC (12pc)
- 1 extra ESC 10A with BEC for Power supply (the other ESC are OPTO)
0 comments