Delta Pusher Design and BUILD VIDEO

|ProjectFlightDesign
Delta Pusher Design and BUILD VIDEO

This is a pusher version of my Delta Wing design. All of the same dimensions, except the root chord has been moved up a 1/2 inch. Flies great!

Wing span: 30 inches
Root chord: 11 inches
Tip chord (including 2 inches of elevon): 9 inches
Sweep: 11 inches

Motor: 1300 kV blue wonder
Prop: 8x4
ESC: 18A
Receiver: Orange Rx
Battery: 1300 mAh 11.1V 3S lipo
Servos: T-Pro 9 gram

Center of Gravity = 7 inches from nose

Supplies:
1 x 30" x 20" foamboard sheet
1 x 30" x 15" 1/2 inch pink foam
Strapping tape
Hot glue
Popsicle sticks
Control horns/push rods
Motor with mounting system
Velcro

0 comments

Leave a comment

Please note, comments need to be approved before they are published.

Have a story to share?

Share your builds, flying experiences and tips with the Flite Test community.

Write For Us →