DIY 40$ FPV receiver with Fatshark module

|val0production
DIY 40$ FPV receiver with Fatshark module

 

 

 

 

 

On the diagram, the module receiver is placed in this direction :

If you want change the frequency : (Dot not use the Pin 10, 11, 12 because it's the antenna connector)

 

 

 

 

UPDATE : I PUT NEW SWITCH FOR CHANGE THE FREQUENCY !!! 


 

Val. 

0 comments

Leave a comment

Please note, comments need to be approved before they are published.

Have a story to share?

Share your builds, flying experiences and tips with the Flite Test community.

Write For Us →