DIY Pocket Transmitter
Definitely different looking and feeling, The wood and brass is a nice retro touch.
The pocket TX is much smaller than the regular Horizon 4Ch TX.
The guts of the spektrum radio
The simple board layout makes intergration into other projects super easy.
The modified TX board and the one right out of the unmodified TX
Don't put the screws in this part of the TX though! The spacing is too close and may bridge contacts.
4X AAA batteries equals 6Volts!
The other half simply slips over the back cover
You can use the TX for all sorts of projects!
Flies just fine and dosent feel much different than the other transmitter.
FREE PLANS
0 comments