How’s it going guys? Today I’ll be doing an unboxing of the DRQ250 “Mini-D” frame made by Drone Frames. This will be the first part of a few videos, which will take you from the unboxing to FPV flights and an overall review. But if you don't want to watch all of them I recommend you watch the last video (DRQ250 Review and FPV)
DRQ250 Unboxing:
Some key features on this frame:
- Clean and dirty sections connected with M3 vibration dampeners for jello free video.
- Included power distribution board (PDB), makes soldering ESCs a piece of cake.
- Foldable arms make this a true throw in your backpack mini quad.
- Top plate has groves that encourage use of rubber bands to mount different items, which allow for some play when you crash. (If you ain’t crashing you ain’t flying)
- Optional camera mount plate is great since it can be act as a bumper for hard crashes. (Better to break this instead of the whole bottom plate)
- Lastly, the DRQ250 is a beauty!
DRQ250 Build:
Parts List:
4 -RCX 1804 2400 kv motors (I recommend using all CW with the use of locknuts instead of 2 CW & 2 CCW unless you can find locknuts for CCW threads)
4 -F-12A Fire Red series SimonK-(RapidESC)
KK2.0 board (opted for a Flip 1.5 instead)
1000 mAh Turnigy Lipo
5x3 Gemfan props
(Note this a budget build none of that fancy (quality) stuff)
UPDATE: Now using naze32 and EZUHF 4 channel receiver (CPPM)
Smile for the camera
Flip 1.5 it is! Naze32 is next!
Found some locknuts with the CCW thread
Will it lift a 2200 mah?
With ease, but rudder lacks responsiveness
DRQ250 Review and FPV :
Please Rate, Thank you and Enjoy!
RCBernDog
0 comments