Easy Drone Scratch Build

May 23, 2012|bixler13

The Easy Drone is a remote control airplane that I designed myself for fpv. It is a very easy build and flies really good. The plane is very stable and gets good lift. Although it is intended for fpv, it does not need to be flown fpv. If you are not into fpv planes, this would be a great plane to build and fly.

Wing:
Wingspan: 60 inches
Root Cord(including ailerons): 10.5
Root Cord(not including ailerons): 9
Airfoil: 5X60

Fuselage:
Length:21
Width:4
Height:2.25

Tail:
length:5 incl. elevator
Elevator:1
Width:15
Middle vert stab height: 5
Side vert stab height: 3.5

Total Length: 44.5
Carbon Spar Length(from trailing edge of wing to leading edge of elevator): 18.5
Material: Dollar Tree Foam board and Home Depot 1/2 inch pink foam for airfoil

Attached Thumbnails