Easy to build foam scratch build, the F-22 Raptor is a great design for a fun easy to fly RC plane, and it also has great trainer tendencies.
Watch this RC plane in action in our F-22 Raptor Review Episode here
TIP for printing the plans:
To print "tiled" use Adobe Reader X and in the print dialog select "POSTER", select "Cut Marks" and make sure "Tile Scale" is 100%. Then overlap and tape as required (after trimming the top overlapping edge).
(Thanks youtuber larrybarrick for this suggestion!)
Plans:
http://www.rcgroups.com/forums/showthread.php?t=740049&highlight=simpl+f22
Recommended Electronics
RADIO
Turnigy 4X FHSS 2.4ghz Transmitter and Receiver (Mode 2)
HobbyKing HK6S 2.4Ghz FHSS 6Ch Tx & Rx (Mode 2)
SERVOS
Hextronic 9 Gram Servo
Suppo SP-90 9g Micro Servo
Turnigy TG9e 9g Servos
PROP
APC-style Electric Propeller - 8x4E
GWS EP Propeller (RD-8043 203x109mm) (6pcs/set)
BATTERY
Turnigy 500mAh 2S 20C Lipo Pack
Turnigy 500mAh 3S 20C Lipo Pack
ESC
Dynam 18Amp ESC w/ 3A BEC
TURNIGY Plush 18amp Speed Controller
Hobbyking SS Series 18-20A ESC
Suppo 18A Brushless ESC
Motor
Blue Wonder 2712-12 24g
HEXTRONIK 24GRAM BRUSHLESS OUTRUNNER 1300KV
Turnigy Park300 Brushless Outrunner 1380kv
Suppo 2208/14 1450kv Brushless Motor (Park 370 equiv.)
FOAM BOARD
ADAMS Foam Board
OTHER SUPPLIES
Push Rods: 1.4mm Piano Wire
Linkage Stoppers D1.8mm (10pcs)
Linkage Stopper "Speed Clevis"
Female JST battery pigtail 12cm length (10pcs/bag)
0 comments