Fin-Less Delta Wing Experiment

|schraut5
Fin-Less Delta Wing Experiment

Experimenting how small I can make the fins on my delta wing design, while still maintaining control in the yaw axis. Hope that you enjoy!

The plane that I am using here is a pusher version of my Delta Wing design. All of the same dimensions, except the root chord has been moved up a 1/2 inch and the back has been squared off to accomodate the prop. Flies great!

PDF's for the puller version of this plane, it's exactly the same, just take off 1/2 inch in the back and square it off:http://www.intensewalkera.webspace.virginmedia.com/public/PLANS/SCHRAUT5%20FL...

Wing span: 30 inches
Root chord: 11 inches
Tip chord (including 2 inches of elevon): 9 inches
Sweep: 11 inches

Motor: 1300 kV blue wonder (and 1500 kV)
Prop: 8x4 (1500 kV has a 7x3.5)
ESC: 18A
Receiver: Orange Rx
Battery: 1300 mAh 11.1V 3S lipo
Servos: T-Pro 9 gram

0 comments

Leave a comment

Please note, comments need to be approved before they are published.

Have a story to share?

Share your builds, flying experiences and tips with the Flite Test community.

Write For Us →