The frame.
The motors (DT750) and one ESC (hk ss series 18-20A) flashed with the awesome SimonK firmware.
My Turnigy receiver and the KK multicopter control board V2.5.
I soldered the first 4 channel cables directly on the pinout board.
The simple power distribution.
My WorkStation :)
I tried to build the camera mount, but still not good enogh. Using some earplugs helps a lot canceling the motor vibrations.
My camera (sony action cam aka HDR-AS15), great quality.
Want to modify the gimbal to work with brushless motors, but have no skills to creat the control board.
I made the landing gear like this, I know this is not beautiful but is pretty solid and works fine. :)
Sorry the poor quality.
My two first videos at facebook.com/DronesCreation
The quality is good (Sony action cam) but it has a lot of jello cause the propellers were completely uncalibrated, sorry :)
0 comments