Josh's (swoose inspired) Wing Plans
Available here: FULL PLANS
Josh and Peter share Build Tips for Flying Sleds.
Josh had inspiration for his sled from the Bulldog (pictured above) and the Swoose.
As you can tell Josh's Sled was quite strong, even while holding from the edge of the wing.
He even borrow some parts from the C-19 Cabbie.
Peter took a different approach, using our very own Flite Test Foam boxes to design his wings.
And recycled the spar from the Microwave Plane build.
Peter was able to do some testing to get his plane ready, and had to redesign his tail to get it flying well.
With the original tail design, the elevator couldn't catch any air, losing significant control over the craft.
We hope this video helped inspire you with your own builds, and post your designs in the articles section so everyone can enjoy them and get inspiration for their builds.
As always thanks for supporting us and allowing us to create some of the crazy things we think up. Please share your creations and post an article or join the discussion in the FORUM!
Josh's (swoose inspired) Wing Plans
Available here: FULL PLANS
0 comments