Flyingwings Falcon Wing Review - Build - Flights

|iwan_canobi
Flyingwings Falcon Wing Review - Build - Flights

Quick review of the flyingwings.co.uk Falcon FPV Wing. A small, 1m (40") wingspan wing made from EPP. A nice little wing that is good fun, but can be tricky to fly without stabilisation.

Excuse the microphone quality, thats next on my list of things to purchase!

Available from www.flyingwings.co.uk

 

 


Setup Spec:

  • 1m (40" Wingspan)
  • EPP Foam construction.
  • Turnigy 2826-6 2200kv Motor
  • 50A HK ESC
  • 6x5E Prop
  • 2200MAh 3S Batteries (~15 minute flight times)
  • Towerpro 9G Metal Gear Servos
  • Storm OSD Flight Controller
  • Fat Shark VTx
  • FrSky X8R Receiver.
  • Gopro Hero2
  • All up weight including battery and FPV gear ~780grams.

After a few days I managed to crash it as well! Its pretty robust though so a bit of straightening and hot glue later and all is good again:

 

0 comments

Leave a comment

Please note, comments need to be approved before they are published.

Have a story to share?

Share your builds, flying experiences and tips with the Flite Test community.

Write For Us →