FPV at the flying club in Chilliwack BC Canada

|DeValk
FPV at the flying club in Chilliwack BC Canada

 

My scratch built Tricopter using one of David's original frames. 

The gear I used:

KK2 Board

Castle Creations Phoenix 25 ESC's

FMS 980KV Motors

Apc 8x3.8sf props one counter rotating

4 cell 3300mah flight pack

3 cell 1000mah for the camera stuff

Boscam 200mw 5.8ghz video transmitter

Boscam hd19 camera

Boscam video gogles with built in 5.8ghz reciever

 

I would like to thank David and all of the flitetest crew for your hard work, if it wasn't for you guys I wouldn't be doing this stuff. Keep it up and happy landings.

 

PS: My Batbone should be done soon

 

0 comments

Leave a comment

Please note, comments need to be approved before they are published.

Have a story to share?

Share your builds, flying experiences and tips with the Flite Test community.

Write For Us →