This is my plane design for FPV flying. It has a 40 inch wingspan and is made from a single sheet of 20" x 30" Dollar Tree foamboard and features a KFm2 airfoil. I will post a video soon about this plane.
https://sites.google.com/site/projectflightd/
Motor: 2212-13 1000kV 50 gram from RCHotDeals
Prop: 10 x 5
ESC: 18A
Servos: T-Pro 9 gram metal gear
Battery: GensAce 2500 mAh/Turnigy Nano-tech 3000 mAh 3-Cell Lipo 11.1V
Tx/Rx: Spektrum DX7se with AR6210
FPV Tx/Rx: 5.8 ghz 200 mW from FoxTechFPV
Camera: Pixim Seawolf 690 tvl from SecurityCamera2000
Tx Antenna: Homemade cloverleaf circularly polarized
Rx Antenna: Homemade skew planar wheel circularly polarized
OSD: CE OSD v1.5 from FoxTechFPV
Battery: Turnigy Nano-tech 460 mAh 3-Cell Lipo 11.1V
Monitor: Haier 7 inch LCD
0 comments