FREE PLANS - CORVUX V1

FPFB250 – Aka:FleshPilot Foam Board 250

FCU(Flight Control Unit) Flip(MultiWii 2.5) - http://witespyquad.gostorego.com/flight-controllers/flip-2-5.html Motors, 4 2300kv - http://witespyquad.gostorego.com/motors/rtf-mini-motor-x2204-2300kv-light.html Motor Speed Controllers - 12 amp ESC's - http://witespyquad.gostorego.com/speed-controllers/readytoflyv-f-12a-fire-red-12-amp-rapidesc-simonk.html Propellers 5 inch - http://witespyquad.gostorego.com/propellers/hq-prop-5x4-fiberglass-composite-prop.htmlAnd of course you need to have a Radio and might want FPV gear, a GoPro and Batteries.

This frame with wood is 193 Grams.

Items you will need to build the FRAME only:
1. Printer.
2. 14 pieces of Paper.
3. 2 full pieces of Foam Board. 20in x 30in x 3/16in.
4. Exacto Blade
5. Hot Glue Gun with Glue sticks
6. 2 pieces of square dowel 1/2in x 8 1/2in.

ATTENTION!! On the body of the fuselage of the plans you will see some long dashed lines. Only cut through ONE side of the foam. I will cover this in the build video.

To download the plans go to FleshPilot.com and click on the FREE PLANS link at the top right of the home page. Or Click here http://www.fleshpilot.com/?page_id=2264

This is how the plans should look when taped together.

BODY

MIDDLE

TOP

All pieces cut

Dry fit mock up.

Here is a early pic of the prototype.