FTScratchBuild-Intermediate
This Flite Test scratch build airplane was inspired by Bloody Mick's FUNBAT and the Sig Wonder.
The FT Bloody Wonder is the newest addition to the Flite Test Swappable Series! (A series of scratch built planes designed with an interchangeable fuselage.)
Check out the full line of Speed Build Swappable Airplanes HERE!
The FT Bloody Wonder features a swappable fuselage that is interchangeable with the other airplanes in the Swappable Series!
This combat flyer is capable of vertical take off. It can fly off the 24gram motor setup on previous swappable fuselage.
One of the unique designs of this scratch build is the rounded aileron wing design. Created the same way that the Baby Blender wings are made, the rounded ailerons provide great lift!
In case you missed the review of this plane you can check it out here:
http://flitetest.com/articles/Vertical_Drag_Race_Combat
The FT Bloody Wonder is available as a Speed Build Kit CLICK HERE to find out more!
FT Bloody Wonder Build Plans Available Here:
FT Bloody Wonder-Swappable - Full Size
FT Bloody Wonder-Swappable - Tiled
TIP for printing the plans:
To print "tiled" use Adobe Reader X and in the print dialog select "POSTER", select "Cut Marks" and make sure "Tile Scale" is 100%. Then overlap and tape as required (after trimming the top overlapping edge).
(Thanks youtuber larrybarrick for this suggestion!)
Detailed build video for the power pod (fuselage) available here:
http://youtu.be/aMeGqVGZcjA?t=2m11s
Equipment recommended for this build:
FT Foam Board
Emax ES08A II Servos
Push Rods
Linkage Stoppers
BLHELI Series 30amp ESC
Lumenier 2250 3s 35C battery
More photos available in the forum post! Click the "Join the Discussion" link below!
0 comments