Hey there,
After building the newly released Sparrow in needed a motor mount an didn't want to do the cutting shown in the build video. So i fired up my beloved CAD program and started making a motor mount you can print yourself.
Right now it will fit 2204/06 size motors using two 6mm M3 screws in the 16mm holes.
The mount is a pretty good friction fit but i've included some holes so you can fix it from the sides using your spare bbq stick thingy. ;)
More images
There is also a small tunnel to fix the cables down with a zip tie.
The mount is offset to fit 6 inch props and i've included two servo horns in the download.
So thanks for checking this out and happy printing
http://www.thingiverse.com/thing:1354080
cheers
Robert from copterholics.com
0 comments