GoPro Raptor

|mawe
GoPro Raptor

This is my F22 Raptor flying with a GoPro Hero2. 

The camera is slightly heavy for the plane, but it handles ok in hight speed. flying slow is not possible as shown on the landing.

Bellylanding in Dubai means sand, and sand and brushless do not play well together so pusher style flying is really making the engines last longer.

I started off with mutirotors and built a few different T and X  copters mainly flying the APM 2.5 board, and had a lot of fun, you can find some of the flights on http://www.youtube.com/user/wennergrenm 

This is built with foamboard found in Geant Supermarket in Dubai, it comes in lots of colors and is of very high quality, maybe slightly heavy if you leave the paper on, but to build a raptor in grey is really cool.

Setup:

Turnigy D2826/6 2200KV Motor
Turnigy Plush 40 amp ESC
6x4 APC Prop.
2200 or 1800 mAh 3s

 

 

 

 

 

 

0 comments

Leave a comment

Please note, comments need to be approved before they are published.

Have a story to share?

Share your builds, flying experiences and tips with the Flite Test community.

Write For Us →