HK Quad Controller Setup

|FliteTest
HK Quad Controller Setup

In this episode of Flite Test, we follow up with Josh Bixler as he shows us how to install the HK Quad Board, that we previously programmed, into a copter!


Parts We Used: 

Controller Board:

http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=21977&aff=247441

Motors:

http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=6247


ESC:

http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=4312


Battery:

http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=8932

RX:

http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=11965

USBasp (Programming Card)

http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=21321

0 comments

Leave a comment

Please note, comments need to be approved before they are published.

Have a story to share?

Share your builds, flying experiences and tips with the Flite Test community.

Write For Us →