Hello everyone.
I build scratch planes. This winter I plan to build a foam Polikarpov Rata and a bunch of the swapables though probably without swapping pods. After flying for years and buying motors and esc on recipes online I am looking for some fairly easy way to choose the entire righ. I would really really really like some step by step advice.
Thanks in advance.
I have two examples of planes for which I need engines:
This is a foam version of the GP Slowpoke. It is now running on a RC A2212 2200KV Outrunner Brushlessmotoren w/30A Regler. The prop is a foldable 7.5/4 and it usually runs on a 1250 11.1v.
I am not very happy with the performance of this plane. I flies well but if has no pop and it sounds like a fly. I have at least 4 or five other planes that need to be rerigged.
This is a small foam j3 typeathing. It is basically finished. It has a 1m wingspan.
0 comments