Kraken - BUILD

|FliteTest
Kraken - BUILD

FTScratchBuild-Advanced

The day is here! We finally have the plans available for the Kraken. 

FREE PLANS

SUPPLEMENTAL VIDEOS

This kit is so big that it wouldn't even fit in one screenshot. The Speed Build Kit will be available sometime early August. 

Also, keep your eyes open for tons of cool accessories incoming!

Measurements for landing gear wire

18" long x 1/8" thick (45cm long x 3.18mm thick)

Bends are 2" (5cm) and 6" (16cm)

Links for tires incoming! 

A big ol' wing needs a big ol' battery!

We've been using this 6000MAh made by Gens ace. This can get you close to a half-hour of flight time and is impressively light for its size. 

RECOMMENDED ELECTRONICS

  • Motor: 2x Suppo 2217/7 1250kv Brushless Outrunner
  • ESC: 2x Suppo 30A Brushless ESC
  • Servo: 2x GS-9025MG Micro Analog 11g Metal-Gear
  • Prop: 2x APC 10x4.7 Slow-Fly
  • Battery: 2200 - 6000 mAH 3s
  • 4x 12" Servo Extensions

FREE PLANS

 

Hope you all have as much fun with this plane as we do! Go crazy! See what kind of trouble you can get this monster into. Post some photos or videos on the forum page!

0 comments

Leave a comment

Please note, comments need to be approved before they are published.

Have a story to share?

Share your builds, flying experiences and tips with the Flite Test community.

Write For Us →