Cyclops Eye 5 FPV Goggle

|stereodreieck
Cyclops Eye 5 FPV Goggle

Hey folks,

I would like to introduce you the new 5 inch FPV Goggle from Marek from Poland.

The amount of comments on the different DIY Goggles builds on Youtube forexample that Goggles are still a hot topic.

The people are looking for an inexpensive, small, well made FPV Goggle with a good Image quality. And these Goggles offers exacly what everybody looking for (especially with the better upgrade lens and Mareks 5 inch Screen)

Another problem besides the high price of other glasses is the compatibility for people who wear glasses because they are already short or farsighted. At this point Marek FPV Goggles also beats all other glasses because they can easily be pulled over the normal glasses.

What is in the Box ?

The Goggle itself, the manual, masking tape and self-adhesive stickers

The 5 inch screen without case and prepared to put it into the Goggle itself.

masking tape on the front side

Everthing you have to do now is put the screen into the Goggle (with a little bit pressure), mask the holes on the side and connect the Receiver and battery.

 Last step; enjoy the good image and hopefully a good flight as well.

I hope my Review is helpful for you. And please feel free to comment and subscribe.

BTW: My Review is available in german and english as well.

BTW: If you buy the Goggles at Mareks Store or somewhere else mention my nickname stereodreieck. That helps me to become more popular  and get a sponsor.

English Version:

German Version:

 

 

 

 

 

 

 

 

0 comments

Leave a comment

Please note, comments need to be approved before they are published.

Have a story to share?

Share your builds, flying experiences and tips with the Flite Test community.

Write For Us →