Mikey's FPV v3 Scratch Build

|FliteTest
Mikey's FPV v3 Scratch Build

In this episode of Flite Test, watch as Josh Bixler walks us step by step, through building Mikeys FPV v3. This scratch build is a great FPV platform, and also a great slow flying trainer. Watch to learn how to build your own! 

 Get FREE plans here: http://mikeysrc.com/FPV_V3.html   

Parts we used: 

TURNIGY Plush 25amp Speed Controller 

Turnigy Park450 Brushless Outrunner 1050kv 

LINKAGE stopper D2.1MM (10SETS) 

GWS EP Propeller (RD-1047 254x119mm) (6pcs/set)

HXT900 9g / 1.6kg / .12sec Micro Servo 

Turnigy 2200mAh 3S 20C Lipo Pack 

PIN horns L22XW19XH.9 (10SETS)

0 comments

Leave a comment

Please note, comments need to be approved before they are published.

Have a story to share?

Share your builds, flying experiences and tips with the Flite Test community.

Write For Us →