Pat G's New WASP!
A huge thank you to everyone that helped Pat find a name for this beast.
Congratulations to TRACKS for picking the winning name!
What you get with this model is big fun in a small package! This craft is a joy to fly. Fast ,light ,and very responsive. Took a hit to the ground,solid enough to kill an OSD, and not a scratch on her.
Bellissimo Patrizio!
" Simplicity, Durability and Affordability." With this in mind, Pat designed the frame to be as light and tough as possible. In order for it to be simple to assemble it has a minimal amount of plates and hardware.
Nicely engineered with a full carbon fiber lower deck and arms it is rigid and light. 323 mm at the widest and 725 grams AUW with a 2200mah 3s and FPV gear. Arms will fit a range of motors and will accommodate 6 inch props!
The design has a low parts count and goes together quickly.
Pat G's mini Hex frame.
Full Carbon lower plate and arms. Yellow G10 top deck
HIEE 1.5w TS3215 5.8G Video Tx
RunCam Sky camera 2.1mm wide lens
KVOSD
Fr Sky DR4 II 4ch telemetry receiver
RCX 1804 (2400KV) Micro Outrunners
RCX 10A ESC Brushless Motor Speed Controller (G Series / Programed for Multicopter - SimonK Firmware)
The RCX motors and 10 amp escs are fine but I am going to switch to Cobra 2204 2300kv motors and 12 amp escs or something close for more power
Minion frames and parts at these fine locations.
Canada
http://www.greathobbies.com/index.php
http://rotorgeeks.com/index.php?route=product/product&product_id=90
U.S.A
0 comments