FREE PLANS: MINI BOSS
I’ve wanted to purchase a mini quad frame (QAV250, MPX230, Spanky, Kwad) but decided I’d build my own first. The frame is made out of 1/8” thick acrylic and plywood. So far it’s been successful, these mini quads feel a bit more locked in than larger size quads. Probably not the best for flying line of sight since this thing looks tiny once it gets away from you. My next step in the build is to get some fpv gear and tune it for some aerobatic flying. After a handful of flights I'm getting about 5-6 minutes of flight time. Since I'm new to fpv and I'm considering some Fatshark Teleporter V3 goggles. Any thoughts on these?
Parts List:
- 4 -RCX 1804 2400 kv motors
- 4 -F-12A Fire Red series SimonK-(RapidESC)
- KK2.0 board
- 1000 mAh Turnigy Lipo
- 5x3 Gemfan props
V1 of the Mini Boss
Maiden Flight
0 comments