Last summer I went to Austria with my girlfriend for the holiday. Because I just completed my upgrade to the APM 2.5 flight controler I wanted to bring the Tricopter with me to fly in another surrounding then at home and try to make some great FPV footage. I flown a total of 6 FPV flights, 4 around the house and 2 at the Nockalmstraße. I wanted to make more flights but I had forgotten the transformer for my batterycharger! so I had to use one standart appliance transformer with an maximum output of 1.2 amps. So after a flight it took some time to charge everything back up again.......
The first video is a compilation of my 2 flights at the Nockalmstraße, the second video is from around the house. I hope you enjoy watching them as much as I enjoyd making them.
Rc setup:
Turnigy Talon tricopter frame
1000KV NTM 28-26 outrunners
25AmP turnigy plush ESC's
APM 2.5 flight controler with GPS and telemetry upgrade
10*5 inch graupner props
turnigy 9X Tx with FrSky and telemetry upgrade, telemetry voltage sensor installed on tri.
5,8 gHz 200Mw video TX
gopro Hero 3 Black edition. Also used for FPV
Zippy compact 3700Mah 4S1P 25C battery's
0 comments