After building so many scratch builds i decided to try and build one of my own designs,I took a three view of the geebee r3 and had it blown up on a A1 format cut out all the pattern and layed them all on A0 paper,I used the FT slinger as a referance to build the fuselage.The slinger wings were used to do the geebee wings but i had to move the bends and spar slightly foward. The canpoy is a two liter soda bottle cut and shaped and I sprayed the inside with black paint and lacure the measurements are as follow:
wingspan 36"
and from nose to tail 29"
the fuselarge is 4" wide tapering down to an inch at the tail
1200 kv motor
3 bladed 8x6 prop with 2" spinner
80 amp esc with separate bec
2200 3 cell lipo but plenty of room for 4 or 5 cell
I will try to get video when weather gets better
FT RIPSLINGER
FT BABY BLENDER with mirror reflective decals
0 comments