My review of the Turnigy Bonsai Wing =)

|Rcairplanenoob
My review of the Turnigy Bonsai Wing =)

 

 

Here is a review of the Hobbyking bonsai wing.

I set it up with

  • Hextronic 24g 3000kv Brushless motor
  • Turnigy Plush 18amp Brushless Esc
  • (2) Turnigy 9g servos
  • 6 channel DSM2 OrangeRx (single antenna)
  • 2-4s hobbyking low voltage buzzer
  • turnigy lost be found module
  • Turnigy 3s 1000mah 20c lipo

 

0 comments

Leave a comment

Please note, comments need to be approved before they are published.

Have a story to share?

Share your builds, flying experiences and tips with the Flite Test community.

Write For Us →