This is my new Versa Wing (Blunt Nose Version):
Fotos and videos: Horácio Lara Matos
Falcon Tattoo: Xpoetic-destructionX from devian art
29/06/2014
Versa Wing
Material: Depron 5mm
Packing tape
Hot Glue
Black contact paper (Falcon tattoo)
2 x 9g servos
Umbrella rib for pushrod
Weight: 330g (whitout motor, esc and lipo)
500g (with 2200 lipo, without motor and esc)
so approx 700g RTF.
Now I'm in doubt which combination of motor and prop to use:
Turnigy 2826/6 2200KV with 6x4 prop (already have)
Emax 2822 1200KV with 8x4 or 9x4.7 prop (already have)
Emax 2812 1534KV with 7x6 prop (need to buy combo)
NTM 2836 2700KV with 6x4 prop (need to buy motor)
Any suggestions? Other motors? Other combinations?
6/7/2014
Maiden this weekend with Turnigy 2826/6 2200KVm 6x4 prop and 2200 3s Lipo + 1300 3s lipo for leds and CG. First flight it was a litlle unstable (CG still back). At top speed she went down real fast.
Second flight with 3 batteries all away to the front! 2200 (for flight)+ 1300 + 380. More up deflection on ailerons for straight flight at top speed. And it flew much, much better with a great, great glide distance. It´s even hard to land or going down because she glides endlessly. Still need a little extra weight to the front for my taste.
Just a great wing!
13/7/2014
Update with some color stripes at bottom for orientation
20/72014
Take off bottom color stripes and put a tribal stripe one side and FT-Versa in other side.
20/7/2014
RIP
Lost signal and wing went down in a spiral! Broke wing and 2200 battery. :(
Now I'll make a new one!
0 comments