Paint and graphics for FT swappable's

|tmask32
Paint and graphics for FT swappable's

Just showing off my speed builds. Used staples sticker paper for the decals and "Krylon Short Cuts" for the paint. The paint is foam safe so great for these projects.  Use light coats making sure not to saturate the paper. And low tac painters tape or like I did pre-stick your painters tape to something else before applying. 


0 comments

Leave a comment

Please note, comments need to be approved before they are published.

Have a story to share?

Share your builds, flying experiences and tips with the Flite Test community.

Write For Us →