This is a quick Article about a 172 stlye Swappable Cessna that I built. I have named it Cloud Dancer for when it goes into mass production :)
It is a very simple build with only dtf. There are no rounded or curved parts to worry about just foam board all straight cuts and folds. No poster board to deal with as I just can't seem to get a a nice clean fit with any of my builds with it. The plane flies great for a newbie like myself ( I've been doing this for 3 summers now , is that still a newbie?) . I have made a couple now and they both fly well. I have also got an area on the plans for flaps but have yet to try that
Simple straight forward fuse optional rudder shown. I used this tail on one plane with no rudder control for just bank and yank flying
Ready for some dancing
TEST FLIGHT
oh well back to the drawing board
The plane above is the one in the oops video wing is now glued to fuse for added strength
This is a better flight
Plans are available below for the flite test community.They are also on Ebay if you really really need to donate :)
Specs.
emax 2212 980 kv motor
9x6 prop
20 amp esc
1300 mah battery
9 gr servo
gift card control arms
You can also see other ideas of mine on my Bentech RC facebook page or RC Canuck youtube Channel for flight videos
Currently working on a web page with my designs plus more to come go to http://www3.sympatico.ca/pd.bender
0 comments