Simple Homemade Toolbox (w/ labeled blueprints)

Here it is! The simplest of all toolboxes that can still hold loads of stuff. Made of easy to find 1/2" plywood, a 1" diameter dowel, some screws, and a bit of wood glue.

 here's another angle.

Here's a look at a few things I have in mine.

And the lower compartment. Lots of room for the most important items, tape and popsicle sticks!

The blueprints are not to any scale. All measurements should be there. The cross-hatch lines represent the ends of pieces and the dashed lines are hidden lines. (in other words, an object on the far side of the foremost piece and you can't see it.)