Got sick of digging through a drawer of tools looking for the pliers i kept needing while working on my last plane, and came up with this simple stand, to keep all the pliers i constantly lose in one organized, easy to get to spot.
You will need...
- One piece of Dollar Tree foamboard, cut into a 13" x 8" rectangle
- Hot glue
- Packing tape
- Box cutter
- A pen
- Pliers, duh....
[broken image - invalid source]
Mark the foamboard at 3", and 8", and make a line across it.
[broken image - invalid source]
Make three more lines, a 1/4" to the left of the first line, and 1/4" on each side of the second line. Score, and cut out, as shown below, being careful not to cut through the paper on the back side.
[broken image - invalid source]
[broken image - invalid source]
Hot glue the seams, and tape the end where it connects...
[broken image - invalid source]
[broken image - invalid source]
[broken image - invalid source]
[broken image - invalid source]
[broken image - invalid source]
Load up your pliers, and you are all set...
[broken image - invalid source]
0 comments