Spidex MICRO from Quaternium multicopters
http://quaternium.es/en/frames/71-spidex-micro.html
Motor distance.
220mm diagonal, 145mm front to back and 165mm side to side.
Here is a mash-up of the first three batteries I put through the Spidex micro.
I had to maiden her at night it was so windy.I have tuned it a bit from what you see here.
This is very definitely a sporty little number!
The tumble at the end was due to wind,nerves,and lack of tuning! lol
Damage..
One busted prop and not a scratch on the frame.
I could here it laughing at my attempted abuse. =)
Next few flights!
Let's see, we have the ESC's wired and wrapped.
Motor wires fit nicely up through the bottom of the frame without any drilling.
I will make the power distribution board smaller and may get rid of the XT60 connectors.=)
If you use ZMR motors, you will need to drill holes for the motor mounts. I used some small washers as well.
F.C. and Bluetooth module in place.
Cppm RX will save some weight!
Simple OSD and slimmed down VTRX
Multiwii needs tuning,I know.I am on it. I don't need to worry much about breaking this frame, it is pretty tough.
Spidex MICRO from Quaternium multicopters
http://quaternium.es/en/frames/71-spidex-micro.html
0 comments