OK, this is a super simple way to strengthen your scratch builds or any foam plane for that matter. Simply cut the head off of a zip tie and hot glue it onto the leading edge, the nose, and around the bottom of the fuselage of the plane. If you smack it into the ground or a tree it's not going to crinkle the paper and foam nearly as bad. I used this in my FT mini Speedster speedbuild kit and I smacket the wing right into a tree trunk and it didn't damage it at all. I was so impressed with the strength with adding sutch little weight. Awesome little hack for all your planes!
Have fun flying tough!
0 comments