
tips
HK Quad Controller Programming
In this episode of Flite Test Josh Bixler walks us through, step by step, on how to program your HK Quad Controller. We...
TOPIC
TYPE
795 articles · Newest first

In this episode of Flite Test Josh Bixler walks us through, step by step, on how to program your HK Quad Controller. We...

I've had an number of PM's about programming the er9X to make the 3 position switch work with the NOVA OSD. Its a pain...

For those not wanting to scour through the Radiocommunications Act 1992, the Radiocommunications (Low Interference...

Very simple little tip, on how to put on wire mash guard onto a servo leadYou need:1. A servo 2. Some wire mash 3mm3....

This is one for the guys just getting into the hobby .if you have bought a cheap tx that requires a pc to program but...

The KK board can produce excellent results, but you have to work hard to get the best out of it. You need a well built...

In this episode of Flite Test watch as Chad and David demonstrate how to properly install your prop! Watch this Fast...

By: Chad Kapper This is a list of the most commonly used channels and frequencies for video transmitters and...

Hello!I recently got an APM2 board from DIYDrones and I started testing to log flight data. I just mounted it on a...

Complete quadcopter building guide:Hello everyone!The first thing you need to do is to get the parts you need for your...

How to built DIY Cloverleaf and Skew-Planar Wheel antennas for 5.8GHz and what kind of results can you expect.The video...

Hi, I’m Tyler, from Perth, Australia. We recently learnt about aerodynamics and airfoils in school,...
Share your builds, flying experiences, and tips with the Flite Test community.