Tandem Flight using a single RMILEC NB20 LRS

|Zatoichi
Tandem Flight using a single RMILEC NB20 LRS

RMILEC NB20 20 channel UHF LRS

This article shows how one RMILEC NB20 TX can control more than one craft at the same time.

 Using two NB20 RXs,two Frsky RXs and two 9X TXs;two planes can be flown using the same 433 signal.

One RX uses channels 1-10. Another uses channels 11-20.

It is surprisingly easy to do this. We took no speical precautions in setting this up other than basic failsafes.

This is a VERY interesting UHF LRS! 

Remember to check your local rules and regulations before using this system. In most countries a license is required to opperate on these frequencies. An attenuator can be used between the transmitter module and the antenna to reduce the output power if needed.

 

Thanks to the people at Foxtechfpv.com and RMILEC for sending us this for testing.

 

Click here for more info from Foxtechfpv.com


More to come!

Stay tuned in.=)

0 comments

Leave a comment

Please note, comments need to be approved before they are published.

Have a story to share?

Share your builds, flying experiences and tips with the Flite Test community.

Write For Us →