Tent Stick
The fuselage was made with 2 iglu tent sticks.
Wing 1.5mts span, 30cm root chord, 6 cm aileron, Depron 3mm.
Tail was made with foamboard (stronger than depron).
One of the most difficult part of the project was the bracket desing to hold the wings, motor and landing gear. It was made of one omega 3/4 inch (normally used in electrical arrangements) and one clamp inserted in the omega and glued.
Landing gear was done with bicycle spokes
It fly very funny, at certain speed, the ailerons start to vibrate (I need to install some fixation on them).
Motor: Turnigy D3536/5 1450V Brushless Outrunner Motor
Prop: 10x4SF
ESC: 40 A
Receiver: Frsky X8R
Radio: Taranis
Battery: 2200 mAh 11.1V 3S lipo
Servos: HXT900 9g / 1.6kg / .12sec Micro Servo
Finally, this is me
0 comments