This past week I finished a new 3D printed motor tilt mount for our tricopter. Based on the build from David on his blog (http://rcexplorer.se/projects/2011/09/the-tricopter-v2-5/) and this flitetest artical (http://www.flitetest.com/articles/tricopter-scratch-build) I took it to the next level and made an all in one motor and servo mount.
I have uploaded a short video of it working on you tube:
As you can see there is a tiny bit of flex but not nearly as much as in the 1/2 x 1/2 inch dowel. I am super pleased with the outcome. Comment, let me know what you think, and if you have any questions give us a shout.
And if you have a 3D printer checkout the print file on thingiverse!
http://www.thingiverse.com/thing:162807
Full write up and reivew over at our blog: BackyardRC.wordpress.com
http://backyardrc.wordpress.com/2013/10/08/tricopter-tilt-mount/
0 comments