Scratch Build UAV/FPV platform Part 02 presented by Angel Gendut Productions
UAV/FPV Aircraft Platform : DLE-TR01-00
Tested Drive system :
- Revox 2808-1900kv
- Emax ESC 30A
- Revox 8x4E Prop
- Emax ES08MD Digital, Metal Gear servo
- Emax Tipple 3S-1800mAh (20C)
- Revox 3S-2200mAh (30C) Nano Tech
Tx/Rx system:
- JR Propo XG-7, 2.4 GHz transmitter
- JR Propo RG831B, 8ch 2.4 GHz receiver
FPV Camera:
- GoPro HERO 3, Black edition
Design review :
- Front fuselage length is revised in the (DLE-TR01-01 design).
- Flaperons mixing is implemented, along with 3 position switch for take-off (overhead hand-launch), level flight, and landing.
- Winglets is a potential solution for roll self-stabilisation.
- Wing loading is sufficient for carrying FPV camera, GoPro Hero 3 in this case.
Here are some pictures of the model in action:
and here is the video:
D.L. ENGINEERING - The Sky is Home
www.dle-tech.info
[email protected]
0 comments