tips
3D print of aircraft-Material testing
This article is primarily aimed on those of us who are obsessed with 3D printing of airplanes.
ARTICLES & GUIDES
TOPIC
TYPE
6471 articles · Newest first
how to
FrSky R-XSR FPort Modification
Modify the FrSky R-XSR receiver so the native non-inverted FPort signal is delivered to the Rx’s connection plug.
challenges
$800 DJI FPV system on a $2 plane.
Flying an $800 DJI FPV system on a $2 foamboard airplane.
projects
1914 Burgess-Dunne Flying Wing, Tailless Flyer
Grab your good pipe and go back to the Early days of flight with this balsa conversion of Canada's first Naval Aircraft.
projects
Scratchbuild 27" Fokker Dri hotwire cut
scratch build hot wire cut WWI Fokker Dri sketchup plans colored packing tape dollar tree foam
projects
Foam Board F35 Lightning II Jet (EDF) + Free Plans
I have built a Lockheed Martin F-35 Jet with a 3s 64mm edf unit. The design is based on a model F-35.
tips
Making my own foamboard
Foamboard is the soul of FliteTest, but what if you just don't have access to a FB source?
projects
Smooth Moves: 3D Printed Landing Gear
Lightweight RC plane suspension design made from 3D-printed parts.
projects
Multi-Configuration DIY Build - FREE PLANS
Josh creates our latest DIY model, the G38 Multi-Configuration aircraft.
how to
FrSky XSR FPort Modification
Modify the FrSky XSR receiver so the native non-inverted FPort signal is delivered to the Rx’s connection plug.
just fun
Season 3 of IC Aeronautics
Innovation Center Aeronautics program is back in season!
projects
FT Style - F-104 Starfighter 70mm EDF (FREE PLANS)
I've designed and made an F-104 Starfighter using FT style building techniques that runs off of a 4S 70mm EDF!
Have a story to share?
Share your builds, flying experiences, and tips with the Flite Test community.